CCIF: Plan with Progi: Charles Aubry details seven steps for improving internal ecosystem

2020-10-16T08:23:46-04:00October 16th, 2020|

AS PUBLISHED IN COLLISION REPAIR MAG : Trois-Rivières, Quebec — Running a collision centre can be challenging—but ProgiPlanning has a solution. The first speaker at CCIF’s Virtual Experience was Charles Aubry, account manager at Progi. ProgiPlanning is not a management software, it is a state of mind. [...]

Comments Off on CCIF: Plan with Progi: Charles Aubry details seven steps for improving internal ecosystem

Remaining Efficient with a Lower Work Volume – How and Why?

2020-06-11T08:33:25-04:00June 11th, 2020|

COVID-19 has greatly impacted the collision industry. Between March and May 2020, we’ve seen a 30% to 80% reduction in appraisal appointments from insurers compared to the same period in 2019. The lockdown has drastically reduced the number of collisions while insurers have been calling [...]

Comments Off on Remaining Efficient with a Lower Work Volume – How and Why?

Planning per Severity Before and After the Lockdown Period. What are the Traps to Avoid?

2020-04-29T09:36:33-04:00April 29th, 2020|

Hello, this is Alex from Progi, As you may know, planning jobs per severity in the shop is quite affected and this impact will most likely last for a while beyond the lockdown period. The new reality is this: due to the economy’s uncertainty, many [...]

Comments Off on Planning per Severity Before and After the Lockdown Period. What are the Traps to Avoid?

Progi Visits the Axalta Training Centre

2020-02-24T11:00:44-04:00February 24th, 2020|

Charles Aubry and Stephanie Filteau from Progi were very excited to visit the mythical Axalta facilities. This visit gave Progi and Axalta the opportunity to talk about new technologies in the auto painting world and also to share on best practices regarding capacity planning in [...]

Comments Off on Progi Visits the Axalta Training Centre

Groupe Saillant Now a ProgiPlanning Elite User

2019-12-18T10:59:37-04:00December 18th, 2019|

In the fall of 2019, Groupe Saillant started using ProgiPlanning, a capacity planning solution for collision shops. In addition to the CSR, the main users of the solution are Philippe Denoncourt, shop manager, and Jonathan Baribeau, production coordinator. At first, they found the assessment of [...]

Comments Off on Groupe Saillant Now a ProgiPlanning Elite User

Progi at the 2014 ARA Convention: a Summary

2015-02-23T21:51:10-04:00November 5th, 2014|

The 71th Annual Automotive Recyclers Association Convention and Expo was held this year in Nashville, Tennessee. Progi attended the various conferences and shares his impressions: "There was a lot of emphasis on the standardization of ARA Parts grading & damage locator. This standardization occupies an important place in [...]

Comments Off on Progi at the 2014 ARA Convention: a Summary

Progi at the 2014 International Bodyshop Industry Symposium

2016-05-04T16:54:18-04:00June 2nd, 2014|

On May 19, 20 and 21, Diane Chaîné, Progi's president, attended held IBIS 2014, the International Bodyshop Industry Symposium. Her overall impression is clear: "Technology will dominate the future of the industry." Throughout the conferences, the First Notice of Loss (FNOL) stood out as a [...]

Comments Off on Progi at the 2014 International Bodyshop Industry Symposium

Progi at 2014 OARA Convention

2016-05-10T13:49:50-04:00April 4th, 2014|

The Progi team was at OARA's (Ontario Automotive Recyclers Association) 2014 Convention last weekend. We appreciated talking with Ontario recyclers at the trade show and during the ProgiPix and ProgiParts meetings. Thank you for your presence!

Comments Off on Progi at 2014 OARA Convention
Go to Top